No products were found matching your selection.

Other Related Products

  • Placeholder

    JY GL-1 Filter Control Valve

    Meter and time dual mode, the meter mode, its inflow meter achieved all station can be set according to the water volume demanded , as long as set by the swap of tank volume (L) backwash water and wash water, set cycle running water volume(ton), according to the set value for each station after descending to the switch when the “0”, discontinued or no water stop decreasing and maintain. This series of products have beautiful appearance, high material precision of valve body parts, good strength and high temperature resistance, and the main valve body is connected with metal inserts with good maintainability.

  • Placeholder

    pH/ORP-8500A transmitter controller

    a. On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
    b. Water quality on-line analysis for the power industry, electronic industry,pharmaceutical industry, clinical equipment, food industry, beverage industry etc;
    c. Online analysis and drug maintenance of the process for environmental monitoring, waste water treatment, water purification ;
    d. Industry of the people’s livelihood, such as municipal water treatment, circulating cooling water, swimming pool management, scientific and technological agriculture;
    e. The biological fermentation, industrial coating, chemical process experimental study.

  • Placeholder

    EC-1800 Online Conductivity Meter

    High Cost-Effective ,widely used for chemical industry,paper making industry,industrial coating,pharmaceutical,food,beverage,municipal water,Environmental and so on.

  • Placeholder

    FLECK Control Valve 2900

    Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
    For use with single or multiple tank systems
    Backwashes softener tanks up to 36″ diameter
    Continuous flow rate of 106 GPM

  • Placeholder

    JY DR Large Series Floated Bed Soften Valve

    DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.

  • Digital Optical Dissolved oxygen1Digital Optical Dissolved oxygen1

    DOF-6310 Optical DO (DOF-6141) , Fluorescence dissoved oxygen

    Fluorescence quenching principle, no need for internal filling, no oxygen consumption, and easy maintenance;
    The service life of the fluorescent membrane cap is more than one year (under ideal conditions);
    Original altitude, atmospheric oxygen partial pressure, temperature compensation, to improve the authenticity of the data;

  • Placeholder

    FLECK Control Valve 2510

    Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
    Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
    Non-corrosive, fiber-reinforced polymer construction
    Excellent flow rates (19 GPM continuous, 24 GPM peak)
    Backwash capacity handles tanks up to 16″ diameter for softener, andĀ filter

  • Placeholder

    ROC MFC-1202/ MFC-1382 General/Multi-parameter Online Controller

    Multiplex display, display window with free configuration of 2/4 parameters;
    Support bus data acquisition of 1-4 channels with arbitrary attributes;
    Support 1 way two-wire system 4-20mA variable input;
    Support WiFi and LORA and other wireless data acquisition;
    The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
    Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
    With CE certification

  • Placeholder

    JY Brine Valve

    This series of brine valves have overcome the deficiency of the products existing in the market. It can not only protect water injection and check the air, but also can limit the extreme amount of water injection and filter the water running inside. If water injection is too fast, the liquid level inside the brine well will spill out quickly and the injection has to be shut down, which will result in the insufficiency of water inside the brine tank and have bad influence upon the outcome of recycling. This kind of brine valves depends on water pressure to work. It is reliable in working and valuable in extensive employment.