No products were found matching your selection.

Other Related Products

  • Placeholder

    CCT-5300 series Conductivity/Resistivity /TDS Online Controller

    High Cost-Effective ,widely used for chemical industry,paper making industry,industrial coating,pharmaceutical,food,beverage,municipal water,Environmental and so on.

  • Placeholder

    ROS-8600 Distributed RO Program Control HMI Platform

    Single stage RO controller used for conductivity monitoring and process program control .

  • Placeholder

    FLECK Control Valve 2510

    Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
    Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
    Non-corrosive, fiber-reinforced polymer construction
    Excellent flow rates (19 GPM continuous, 24 GPM peak)
    Backwash capacity handles tanks up to 16″ diameter for softener, and filter

  • Placeholder

    JY GR Large Series Fixed Bed Softening Valve

    GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.

  • Placeholder

    JY DR-1 Fixed Bed Up Flow Regenerate Softener Valve

    Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.

  • NTU-1800 Water Quality Test Online Turbidity TesterNTU-1800 Water Quality Test Online Turbidity Tester

    NTU-1800 Water Quality Test Online Turbidity Tester

    Turbidity is the expression of suspended objects in water to the degree of obstruction of light transmission. This product uses RS485 interface to communicate with the digital sensor, high data accuracy, strong anti-interference, can directly control the digital sensor calibration and automatic cleaning and other functions.

  • Placeholder

    PH/ORP-8851 Water Quality Test PH/ORP Controller

    On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;

  • Placeholder

    FLECK Control Valve 9100

    Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
    Regenerates immediately when needed for continuous soft water
    Corrosion-free fiber-reinforced polymer valve body

  • Placeholder

    CM-230s Economic Conductivity Monitor / TDS-230s TDS Monitor

    CM-230s conductivity meter is an upgrade of the old CM-230, is an economic intelligent industrial online conductivity meter

    1. full range (0~20/200/2000) automatic switching, intelligent digital temperature compensation;

    2. display unit can be changed: uS/cm or ppm

    3. conductivity & temperature can be displayed on the same screen