No products were found matching your selection.

Other Related Products

  • ROC-8221 Single Stage Double Channels RO Controller

    ROC-8221 is a combined control instrument of a single-stage reverse osmosis controller and double-channel on-line conductivity instrument.

  • NTU-1800 Water Quality Test Online Turbidity TesterNTU-1800 Water Quality Test Online Turbidity Tester

    NTU-1800 Water Quality Test Online Turbidity Tester

    Turbidity is the expression of suspended objects in water to the degree of obstruction of light transmission. This product uses RS485 interface to communicate with the digital sensor, high data accuracy, strong anti-interference, can directly control the digital sensor calibration and automatic cleaning and other functions.

  • FLECK Control Valve 2510

    Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
    Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
    Non-corrosive, fiber-reinforced polymer construction
    Excellent flow rates (19 GPM continuous, 24 GPM peak)
    Backwash capacity handles tanks up to 16″ diameter for softener, and filter

  • ROS-2015 ROC-2015 reverse osmosis programming controller

    Single stage RO controller used for conductivity monitoring and process program control .

  • 9500 Softener Filter Control Valve9500 Softener Filter Control Valve

    FLECK Control Valve 9500

    Easily-adjustable, 5-cycle, downflow-brining control
    Rugged, long-life construction features a lead-free brass valve body
    Uses conditioned water for regeneration

  • MF2 Serials Manual Water Filter Valve

    1) Working Position : Filter->Back Wash->Fast Rinse->Filter
    2) Using ceramic moving valve disk , small rotation torque
    3) Abrasion resistance of the sealing surface, outstanding and long-lived deal.
    4) It could be operated with pressure directly.

  • JY GR-1 Fixed Bed Softening Valve

    Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.

  • JY DR Large Series Floated Bed Soften Valve

    DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.

  • CM-230s Economic Conductivity Monitor / TDS-230s TDS Monitor

    CM-230s conductivity meter is an upgrade of the old CM-230, is an economic intelligent industrial online conductivity meter

    1. full range (0~20/200/2000) automatic switching, intelligent digital temperature compensation;

    2. display unit can be changed: uS/cm or ppm

    3. conductivity & temperature can be displayed on the same screen