No products were found matching your selection.

Other Related Products

  • Placeholder

    JY GL-2 Economical Water Filtering Valve

    GL-2 Series of economical control valve is the same as the corresponding GL-1 in function and principle. it use “One dynamic & two static” three layer ceramic valve core technology, It adopts four key controller operation setting method, needless rotation station identification when power on every time.The inlet and outlet water is set on the side of the valve body.Small size, simple structure, no wear and tear, permanent life.It can be widely used in the purification of industrial and civil.
  • Placeholder

    CL-9500 Water Quality Test Residual Chlorine Controller

    CL-9500 residual chlorine controller is a new controller. This meter has a high degree of intelligence and flexibility. It can measure Residual chlorine value and temperature at the same time. It is widely used in urban sewage treatment plants, water supply and other industries and can continuously measure the Residual chlorine value of solution.

  • Placeholder

    ROC MFC-1202/ MFC-1382 General/Multi-parameter Online Controller

    Multiplex display, display window with free configuration of 2/4 parameters;
    Support bus data acquisition of 1-4 channels with arbitrary attributes;
    Support 1 way two-wire system 4-20mA variable input;
    Support WiFi and LORA and other wireless data acquisition;
    The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
    Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
    With CE certification

  • Multi Parameter Online Water Quality Residual Chlorine AnalyzerMulti Parameter Online Water Quality Residual Chlorine Analyzer

    POP-8300 Free Chlorine online controller

    • On-line analysis of municipal water tank disinfection
    • Chlorine supplement control of pipe secondary pressurization (no negative pressure)
  • Placeholder

    JY DR Large Series Floated Bed Soften Valve

    DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.

  • Placeholder

    JY RF Large Double Tank Water Softener Valve

    RF double tank floating bed plane multi-way valve, realized tow tank softening at the same time and regenerating alternate, integrated with brine jet device and brine flow meter and brine electric valve, with soft water flow meter, guarantees the water softening , the water regenerating and water filling to salt box, Complete according to the set volume.as long as the factory according to the raw water hardness set corresponding operation parameters, can always guarantee the stable operation of the equipment, guarantee the softened water and salt consumption.

  • Placeholder

    FLECK Control Valve 3150

    Versatile top or side mount is suitable for commercial or industrial applications
    Backwash capacity accommodates tanks up to 63″ diameter
    Flexible 7 or 12 day time clock or meter initiated regeneration
    Ideal for most filter applications up to 42″

  • Placeholder

    EC-8851 Industrial online conductivity meter

    High Cost-Effective ,widely used for chemical industry,paper making industry,industrial coating,pharmaceutical,food,beverage,municipal water,Environmental and so on.

  • Placeholder

    JY GR-2 Economical Up Flow Regenerate Softening Valve

    Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.