FLECK Control Valve 9100
Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
Regenerates immediately when needed for continuous soft water
Corrosion-free fiber-reinforced polymer valve body

Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
Regenerates immediately when needed for continuous soft water
Corrosion-free fiber-reinforced polymer valve body

On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;

Typical applications • Widely used in thermal boiler deaerator water and large and medium-sized industrial boiler feed water; • Operational supervision of reactor Primary circuit, secondary circuit circuits and condensate system; • On-line analysis of dissolved oxygen in circulating water of heat exchange system; • Deaeration control of marine fresh water system, thermal system and…



On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;

Suitable for large residential/light commercial applications
Fully adjustable, 5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill and downflow service
Backwash capacity handles tanks up to 24″ diameter
Mechanical control (7- or 12-day clock or metered initiated regeneration)
Valve body is solid, lead-free brass
Time tested, hydraulically-balanced piston, seal, and spacer concept to pilot service flow and regeneration

Single stage RO controller used for conductivity monitoring and process program control .

Widely used for electric power,electronics,metallurgy,petrochemical,pharmaceutical ,food and beverage,environmental protection field.

DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.