PH/ORP-9900 Water Quality Test PH/ORP Controller
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
No products were found matching your selection.
Other Related Products
-
-
ROC-7000 Reverse Osmosis Ultra filtration controller
Applicable to all kinds of small and medium-sized single-stage, double-stage reverse osmosis control system. With simple operation, complete measurement and configuration, highly integrated system
-
NTU-1800 Water Quality Test Online Turbidity Tester
Turbidity is the expression of suspended objects in water to the degree of obstruction of light transmission. This product uses RS485 interface to communicate with the digital sensor, high data accuracy, strong anti-interference, can directly control the digital sensor calibration and automatic cleaning and other functions.
-
CCT-5300 series Conductivity/Resistivity /TDS Online Controller
High Cost-Effective ,widely used for chemical industry,paper making industry,industrial coating,pharmaceutical,food,beverage,municipal water,Environmental and so on.
-
JY DR Large Series Floated Bed Soften Valve
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
-
FLECK Control Valve 3900
Flexible 7 or 12 day time clock or meter initiated regeneration
Fully adjustable, 5-cycle control delivers upflow back wash, downflow brining, slow rinse, rapid rinse and down flow service
Designed for single tank or multi-tank systems, alternating or interlocking
Continuous flow rate of 250 GPM -
JY Brine Valve
This series of brine valves have overcome the deficiency of the products existing in the market. It can not only protect water injection and check the air, but also can limit the extreme amount of water injection and filter the water running inside. If water injection is too fast, the liquid level inside the brine well will spill out quickly and the injection has to be shut down, which will result in the insufficiency of water inside the brine tank and have bad influence upon the outcome of recycling. This kind of brine valves depends on water pressure to work. It is reliable in working and valuable in extensive employment.
-
pH/ORP-8500A transmitter controller
a. On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
b. Water quality on-line analysis for the power industry, electronic industry,pharmaceutical industry, clinical equipment, food industry, beverage industry etc;
c. Online analysis and drug maintenance of the process for environmental monitoring, waste water treatment, water purification ;
d. Industry of the people’s livelihood, such as municipal water treatment, circulating cooling water, swimming pool management, scientific and technological agriculture;
e. The biological fermentation, industrial coating, chemical process experimental study. -
FLECK Control Valve 2850
Time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
Solid, lead-free brass valve body for superior strength and durability
Backwash capacity handles tanks up to 30″ diameter
1-1/2″ top mount control valve ideal for smaller size commercial/industrial applications
Consistent brining regardless of salt levels with timed brine refills
Choice of 7 or 12 day clock, manual or meter
Continuous flow rate of 51 GPM with a backwash of 49 GPM