No products were found matching your selection.

Other Related Products

  • Placeholder

    FLECK Control Valve 2510

    Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
    Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
    Non-corrosive, fiber-reinforced polymer construction
    Excellent flow rates (19 GPM continuous, 24 GPM peak)
    Backwash capacity handles tanks up to 16″ diameter for softener, and filter

  • Placeholder

    JY ZR Double Tank Floating Bed Water Softener Valve

    ZR type double tank floating bed control valve including ZR4-1/ZR4-1S(Side Loading), ZR10-1/ZR10-1S(Side Loading). It is equiped the inlet flow Meter and drainage flow meter, All the parameters is set by water volume, The double swap tank is for Alternating regeneration. Continuous water production, Water quality is stable , Adapted to the to high hardness water softening, such as the steam boiler and heating engineering and production process water.

  • Placeholder

    FLECK Control Valve 2900

    Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
    For use with single or multiple tank systems
    Backwashes softener tanks up to 36″ diameter
    Continuous flow rate of 106 GPM

  • Placeholder

    JY GL-2 Economical Water Filtering Valve

    GL-2 Series of economical control valve is the same as the corresponding GL-1 in function and principle. it use “One dynamic & two static” three layer ceramic valve core technology, It adopts four key controller operation setting method, needless rotation station identification when power on every time.The inlet and outlet water is set on the side of the valve body.Small size, simple structure, no wear and tear, permanent life.It can be widely used in the purification of industrial and civil.
  • Placeholder

    JY DR-1 Fixed Bed Up Flow Regenerate Softener Valve

    Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.

  • Placeholder

    CCT-8301A Conductivity/Resistivity Online Controller

    Widely used for electric power,electronics,metallurgy,petrochemical,pharmaceutical ,food and  beverage,environmental protection field.

  • Placeholder

    CL-9500 Water Quality Test Residual Chlorine Controller

    CL-9500 residual chlorine controller is a new controller. This meter has a high degree of intelligence and flexibility. It can measure Residual chlorine value and temperature at the same time. It is widely used in urban sewage treatment plants, water supply and other industries and can continuously measure the Residual chlorine value of solution.

  • Placeholder

    CM-230s Economic Conductivity Monitor / TDS-230s TDS Monitor

    CM-230s conductivity meter is an upgrade of the old CM-230, is an economic intelligent industrial online conductivity meter

    1. full range (0~20/200/2000) automatic switching, intelligent digital temperature compensation;

    2. display unit can be changed: uS/cm or ppm

    3. conductivity & temperature can be displayed on the same screen

  • Placeholder

    EC-8851 Industrial online conductivity meter

    High Cost-Effective ,widely used for chemical industry,paper making industry,industrial coating,pharmaceutical,food,beverage,municipal water,Environmental and so on.