No products were found matching your selection.
Other Related Products
-
GL-2 Series of economical control valve is the same as the corresponding GL-1 in function and principle. it use “One dynamic & two static” three layer ceramic valve core technology, It adopts four key controller operation setting method, needless rotation station identification when power on every time.The inlet and outlet water is set on the side of the valve body.Small size, simple structure, no wear and tear, permanent life.It can be widely used in the purification of industrial and civil.
-
Versatile top or side mount is suitable for commercial or industrial applications
Backwash capacity accommodates tanks up to 63″ diameter
Flexible 7 or 12 day time clock or meter initiated regeneration
Ideal for most filter applications up to 42″
-
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
-
Single stage RO controller used for conductivity monitoring and process program control .
-
Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
Non-corrosive, fiber-reinforced polymer construction
Excellent flow rates (19 GPM continuous, 24 GPM peak)
Backwash capacity handles tanks up to 16″ diameter for softener, and filter
-
Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.
-
“One Dynamic and Two Static” Double Static Ceramics Plates Multi-port Valve is on behalf of another beginning in the field of water treatment control, which can overcome many disadvantages of traditional products in installation.
-
Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
For use with single or multiple tank systems
Backwashes softener tanks up to 36″ diameter
Continuous flow rate of 106 GPM
-
FLECK control valve 5600 softening water equipment generally uses fixed bed downstream
regeneration, the working process is operation, backwashing, regeneration, replacement,
positive washing, salt tank water injection.