No products were found matching your selection.
Other Related Products
-
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
-
CM-230s conductivity meter is an upgrade of the old CM-230, is an economic intelligent industrial online conductivity meter
1. full range (0~20/200/2000) automatic switching, intelligent digital temperature compensation;
2. display unit can be changed: uS/cm or ppm
3. conductivity & temperature can be displayed on the same screen
-
ZR type double tank floating bed control valve including ZR4-1/ZR4-1S(Side Loading), ZR10-1/ZR10-1S(Side Loading). It is equiped the inlet flow Meter and drainage flow meter, All the parameters is set by water volume, The double swap tank is for Alternating regeneration. Continuous water production, Water quality is stable , Adapted to the to high hardness water softening, such as the steam boiler and heating engineering and production process water.
-
Measure range :TUR-6101 (0~5NTU) ;TUR-6102 (0~100NTU)
-
“One Dynamic and Two Static” Double Static Ceramics Plates Multi-port Valve is on behalf of another beginning in the field of water treatment control, which can overcome many disadvantages of traditional products in installation.
-
For complex industrial processes, sewage treatment, water reuse, environmental monitoring, industrial field control, chemical process, thermal detection and discrete control, data transmission control and remote data transmission.
-
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
-
GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.
-
Meter and time dual mode, the meter mode, its inflow meter achieved all station can be set according to the water volume demanded , as long as set by the swap of tank volume (L) backwash water and wash water, set cycle running water volume(ton), according to the set value for each station after descending to the switch when the “0”, discontinued or no water stop decreasing and maintain. This series of products have beautiful appearance, high material precision of valve body parts, good strength and high temperature resistance, and the main valve body is connected with metal inserts with good maintainability.