ROS-2015 ROC-2015 reverse osmosis programming controller
Single stage RO controller used for conductivity monitoring and process program control .
No products were found matching your selection.
Other Related Products
-
-
PH/ORP-9900 Water Quality Test PH/ORP Controller
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
-
FLECK Control Valve 2750
Suitable for large residential/light commercial applications
Fully adjustable, 5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill and downflow service
Backwash capacity handles tanks up to 24″ diameter
Mechanical control (7- or 12-day clock or metered initiated regeneration)
Valve body is solid, lead-free brass
Time tested, hydraulically-balanced piston, seal, and spacer concept to pilot service flow and regeneration -
JY GR-1 Fixed Bed Softening Valve
Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.
-
ROC-7000 Reverse Osmosis Ultra filtration controller
Applicable to all kinds of small and medium-sized single-stage, double-stage reverse osmosis control system. With simple operation, complete measurement and configuration, highly integrated system
-
ROC MFC-1202/ MFC-1382 General/Multi-parameter Online Controller
Multiplex display, display window with free configuration of 2/4 parameters;
Support bus data acquisition of 1-4 channels with arbitrary attributes;
Support 1 way two-wire system 4-20mA variable input;
Support WiFi and LORA and other wireless data acquisition;
The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
With CE certification -
ROC pH/ORP 6900 wall mounted pH/ORP online transmitter
1. On-line analysis and process control of the oil refining, metallurgy, chemical synthesis industry process;2. Water quality on-line analysis for the power industry, electronic industry, pharmaceutical industry, clinical equipment, food industry, beverage industry etc;3. Online analysis and drug maintenance of the process for environmental monitoring, waste water treatment, water purification ;4. Industry of the people’s livelihood, such as municipal water treatment, circulating cooling water, swimming pool management, scientific and technological agriculture;5. The biological fermentation, industrial coating, chemical process experimental study. -
FLECK Control Valve 2510
Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
Non-corrosive, fiber-reinforced polymer construction
Excellent flow rates (19 GPM continuous, 24 GPM peak)
Backwash capacity handles tanks up to 16″ diameter for softener, and filter -
CL-9500 Water Quality Test Residual Chlorine Controller
CL-9500 residual chlorine controller is a new controller. This meter has a high degree of intelligence and flexibility. It can measure Residual chlorine value and temperature at the same time. It is widely used in urban sewage treatment plants, water supply and other industries and can continuously measure the Residual chlorine value of solution.