ROC-7000 Reverse Osmosis Ultra filtration controller
Applicable to all kinds of small and medium-sized single-stage, double-stage reverse osmosis control system. With simple operation, complete measurement and configuration, highly integrated system
No products were found matching your selection.
Other Related Products
-
-
TUR-6101 Laser Turbidity Data Acquistion Terminal
Measure range :TUR-6101 (0~5NTU) ;TUR-6102 (0~100NTU)
-
TUR-2200L Digital Laser Turbidity Online Analysis Sensor
Digital Laser Turbidity online analysis sensor,It can be used for on-line monitoring of water quality in different water bodies such as waterworks and membrane filtrate,The sensor internally completes all measurement calculation compensation
-
ROC-2315 RO controller (220V)
Single stage RO controller used for conductivity monitoring and process program control .
-
FLECK Control Valve 2510
Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
Non-corrosive, fiber-reinforced polymer construction
Excellent flow rates (19 GPM continuous, 24 GPM peak)
Backwash capacity handles tanks up to 16″ diameter for softener, and filter -
FCT-8350 Flow Transmitter
Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.
-
ROC-8221 Single Stage Double Channels RO Controller
ROC-8221 is a combined control instrument of a single-stage reverse osmosis controller and double-channel on-line conductivity instrument.
-
JY GL Large Water Filter Valve
1. Used for softening or demineralization water treatment systems, suitable for:a. Residential filter systemb. Boiler filter water system2. Control valves install to Water filter is used in food and beverage industry.3. Electronic power industry, metallurgy industry, pharmaceutical industry, chemical industry. -
JY GR-1 Fixed Bed Softening Valve
Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.