ROS-8600 Distributed RO Program Control HMI Platform
Single stage RO controller used for conductivity monitoring and process program control .
No products were found matching your selection.
Other Related Products
-
-
FET-8920 Insert Electromagnetic Flow Meter
Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.
-
FLECK Control Valve 2510
Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
Non-corrosive, fiber-reinforced polymer construction
Excellent flow rates (19 GPM continuous, 24 GPM peak)
Backwash capacity handles tanks up to 16″ diameter for softener, and filter -
MF2 Serials Manual Water Filter Valve
1) Working Position : Filter->Back Wash->Fast Rinse->Filter
2) Using ceramic moving valve disk , small rotation torque
3) Abrasion resistance of the sealing surface, outstanding and long-lived deal.
4) It could be operated with pressure directly. -
ROS-2015 ROC-2015 reverse osmosis programming controller
Single stage RO controller used for conductivity monitoring and process program control .
-
PH/ORP-9500 Water Quality Monitor PH/ORP Controller
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
-
FLECK Control Valve 9100
Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
Regenerates immediately when needed for continuous soft water
Corrosion-free fiber-reinforced polymer valve body -
PH/ORP-9900 Water Quality Test PH/ORP Controller
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
-
ROC MFC-1202/ MFC-1382 General/Multi-parameter Online Controller
Multiplex display, display window with free configuration of 2/4 parameters;
Support bus data acquisition of 1-4 channels with arbitrary attributes;
Support 1 way two-wire system 4-20mA variable input;
Support WiFi and LORA and other wireless data acquisition;
The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
With CE certification