For complex industrial processes, sewage treatment, water reuse, environmental monitoring, industrial field control, chemical process, thermal detection and discrete control, data transmission control and remote data transmission.
Time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
Solid, lead-free brass valve body for superior strength and durability
Backwash capacity handles tanks up to 30″ diameter
1-1/2″ top mount control valve ideal for smaller size commercial/industrial applications
Consistent brining regardless of salt levels with timed brine refills
Choice of 7 or 12 day clock, manual or meter
Continuous flow rate of 51 GPM with a backwash of 49 GPM
FLECK control valve 5600 softening water equipment generally uses fixed bed downstream
regeneration, the working process is operation, backwashing, regeneration, replacement,
positive washing, salt tank water injection.
CM-230s conductivity meter is an upgrade of the old CM-230, is an economic intelligent industrial online conductivity meter
1. full range (0~20/200/2000) automatic switching, intelligent digital temperature compensation;
2. display unit can be changed: uS/cm or ppm
3. conductivity & temperature can be displayed on the same screen
Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.
GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.
Single stage RO controller used for conductivity monitoring and process program control .
Multiplex display, display window with free configuration of 2/4 parameters;
Support bus data acquisition of 1-4 channels with arbitrary attributes;
Support 1 way two-wire system 4-20mA variable input;
Support WiFi and LORA and other wireless data acquisition;
The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
With CE certification